|
06-18-2018, 09:33 AM | #2 |
Hello
Join Date: Nov 2008
Location: South Dakota
|
Nope. I haven't.
|
Posts: 23,357
|
06-18-2018, 09:35 AM | #3 |
Needs more middle fingers
Join Date: Mar 2005
Location: San Diego
|
Smooth the panel as much as possible. Wrap in a clean area. Any dirt, lent etc that gets caught under the vinyl will be visible. If the panel is textured, smooth it out or it will look like shit. Try to use it on simple, flat surfaces. Anything with a bowl shape or multidimensional is a PITA. Heat gun is your friend, but a decent hair dryer would suffice.
Those flat panels pictured in your vids should be pretty easy. Doubt you'd even need a heat gun for that stuff. |
Posts: 65,751
|
06-18-2018, 09:37 AM | #4 | |
You Sweetie!
Join Date: Sep 2005
|
Quote:
|
|
Posts: 71,691
|
06-18-2018, 09:38 AM | #5 |
Needs more middle fingers
Join Date: Mar 2005
Location: San Diego
|
Also, vinyls with patterns or textures can be more difficult on some parts, as you have to be careful to not distort the pattern/texture. On basic flat panels, which seems to be what the BMW is mostly comprised of, this isn't much of issue.
|
Posts: 65,751
|
06-18-2018, 09:40 AM | #6 |
You Sweetie!
Join Date: Sep 2005
|
I think I can get all that I need regarding tools and material for about $120ish - It'll be an all day job for sure.
|
Posts: 71,691
|
06-18-2018, 09:41 AM | #7 |
You Sweetie!
Join Date: Sep 2005
|
I was worried about the directional carbon fiber print - I will need to school myself more on that - so that it looks uniform, etc...
|
Posts: 71,691
|
06-18-2018, 09:42 AM | #8 |
You Sweetie!
Join Date: Sep 2005
|
Also - definitely going matte vs glossy - as the dude above recommended in his video - plus it looks good.
|
Posts: 71,691
|
06-18-2018, 09:45 AM | #9 | |
Needs more middle fingers
Join Date: Mar 2005
Location: San Diego
|
Quote:
Everything that woman wrapped in the 2nd video is simple stuff. I didn't watch the first video. Just work slowly section by section. Find a flat edge and work from there. Vinyl is very stretchy, and very forgiving. Just be careful not to stretch it too tight as that can distort the pattern. |
|
Posts: 65,751
|
06-18-2018, 09:49 AM | #10 |
Bono & Grbac wasn't enough
Join Date: Oct 2000
Location: Sioux City, IA
|
Spray paint isn't an option?
|
Posts: 36,976
|
06-18-2018, 09:51 AM | #11 |
You Sweetie!
Join Date: Sep 2005
|
|
Posts: 71,691
|
06-18-2018, 09:52 AM | #12 |
Someone pass the antifreeze
Join Date: Oct 2005
Location: Miami (North Cuba)
|
What do you drive again?
|
Posts: 15,831
|
06-18-2018, 09:53 AM | #13 |
Needs more middle fingers
Join Date: Mar 2005
Location: San Diego
|
It sounds like he wants to do Carbon fiber, so no. And honestly, i think vinyl is a better option for a novice anyway. Especially when the trim panels are as flat as they are. So many things can go wrong with paint, and there's no going back either. Some interior trim panels simply aren't vinyl friendly though, but i don't see that as the case with this car.
I'm 110% confident that SR will have success with this and be happy with the results. Last word of advice SR, use 3M products. |
Posts: 65,751
|
06-18-2018, 09:54 AM | #14 | |
Needs more middle fingers
Join Date: Mar 2005
Location: San Diego
|
Quote:
Any area that's exposed to the sun/heat frequently is not good for the vinyl. Vinyl will fade in the sun. |
|
Posts: 65,751
|
06-18-2018, 09:57 AM | #15 | |
You Sweetie!
Join Date: Sep 2005
|
Quote:
|
|
Posts: 71,691
|
|
|