DIY - Anyone ever wrap your automobile interior trim?
I'm going to do this - I have a little experience with a heat gun and shaping material that's similar in nature to this. Unfortunately my car has that awful cherry wood-grain paneling throughout the doors and dashboard - I'm planning on doing this soon. .....Anyone ever do this?
My carbon fiber hood is being painted currently at a collision center - so once I get her back - I'll do this. Seems pretty basic. I'm also going to swap my engine start button to the red variety and as well as getting the red 'M' insert for the steering wheel - oh additionally I'm going to wrap my steering wheel trim. <iframe width="560" height="315" src="https://www.youtube.com/embed/Igq5ZsoyoDo" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> <iframe width="560" height="315" src="https://www.youtube.com/embed/XDX4UNL2ZNM" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe> |
Nope. I haven't.
|
Smooth the panel as much as possible. Wrap in a clean area. Any dirt, lent etc that gets caught under the vinyl will be visible. If the panel is textured, smooth it out or it will look like shit. Try to use it on simple, flat surfaces. Anything with a bowl shape or multidimensional is a PITA. Heat gun is your friend, but a decent hair dryer would suffice.
Those flat panels pictured in your vids should be pretty easy. Doubt you'd even need a heat gun for that stuff. |
Quote:
|
Also, vinyls with patterns or textures can be more difficult on some parts, as you have to be careful to not distort the pattern/texture. On basic flat panels, which seems to be what the BMW is mostly comprised of, this isn't much of issue.
|
I think I can get all that I need regarding tools and material for about $120ish - It'll be an all day job for sure.
|
Quote:
|
Also - definitely going matte vs glossy - as the dude above recommended in his video - plus it looks good.
|
Quote:
Everything that woman wrapped in the 2nd video is simple stuff. I didn't watch the first video. Just work slowly section by section. Find a flat edge and work from there. Vinyl is very stretchy, and very forgiving. Just be careful not to stretch it too tight as that can distort the pattern. |
Spray paint isn't an option?
|
Quote:
|
What do you drive again?
|
Quote:
I'm 110% confident that SR will have success with this and be happy with the results. Last word of advice SR, use 3M products. |
Quote:
Any area that's exposed to the sun/heat frequently is not good for the vinyl. Vinyl will fade in the sun. |
Quote:
|
All times are GMT -6. The time now is 08:29 PM. |
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.